MCM Electronics

Gpio

Refinements

    Gpio

    1 - 24 of 183
    Sort By Items
    Page  2 3 4 5 6  7>>  of 8 | Next
    Product Detail Availability Buy

    83-16408 - Raspberry Pi T Cobbler Board

    …embedded computer projects with it. What you need is an add on prototyping Pi T-Cobbler from Adafruit, which can break out all those tasty power, GPIO, I2C and SPI pins from the 40pin header onto a solderless breadboard. This mini kit will make "cobbling together" prototypes with the Pi super easy.

    Mfr Name: Adafruit Industries

    Mfr Number: 1989

    See all Project Labs in Components

    In Stock

    $8.99

    Buy Now

    83-15656 - GertDuino: Add-On Board for Raspberry Pi

    Want to do more with your Arduino shields? The Gertduino is an Arduino and Arduino Uno compatible GPIO expansion board designed exclusively for the Raspberry Pi by Gert van Loo.

    Mfr Name: Gertboard

    Mfr Number: 83-15656

    See all Add-On Boards and Modules in Raspberry Pi

    Limited Stock

    $31.49

    Buy Now

    83-16247 - RasPio GPIO Protection Board Pro

    RasPio GPIO Protection Board Pro

    Mfr Name: Cyntech

    Mfr Number: RASPIOBREAKOUTPRO-01

    See all Add-On Boards and Modules in Raspberry Pi

    Limited Stock

    $13.99

    Buy Now

    28-18040 - Trinket 5V Arduino Controller

    Trinket may be small, but do not be fooled by its size! It's a tiny microcontroller board, built around the Atmel ATtiny85, a little chip with a lot of power. We wanted to design a microcontroller board that was small enough to fit into any project, and low cost enough to use without hesitation.…

    Mfr Name: Adafruit Industries

    Mfr Number: 1501

    See all Wearable LEDs in LEDs

    In Stock

    $7.71

    (MSRP $7.95)
    Buy Now

    21-14556 - 6" 2.54MM M-F 40 Wire Jumper Pack

    6" Male to Female 2.54mm Jumper wires Handy for making wire harnesses or jumpering between headers on PCB's. These premium jumper wires are a little over 6" (150mm) long and come in a 'strip' of 40 (4 pieces of each of ten colors).

    Mfr Name: Distributed By MCM

    Mfr Number: SC13053

    See all Jumper Wires in Prototyping

    In Stock

    $8.49

    Buy Now

    27-12600 - 40-Pin Pi GPIO Stacking Header - Extra Long Legs

    Connect your own PCB to a Raspberry Pi B+, Pi2, or Pi3 and stack on top with this normal-height female header with extra long pins. The female header part is about 0.33" tall, good for small HATs that do not to clear the USB/Ethernet jacks. This header has extra long 0.39" pins, compared with our…

    Mfr Name: Adafruit Industries

    Mfr Number: 2223

    See all Raspberry Pi in Single Board Computing Cases

    In Stock

    $2.49

    Buy Now

    83-16327 - 200mm Female To Female 40 Pin To 26 Pin IDC Ribbon Cable

    40 way to 26 way ribbon cable perfect for accessing the GPIO (General Purpose Input Output) port on the Raspberry Pi Model B+ and Raspberry Pi Model B Accessories

    Mfr Name: Stellar Labs

    Mfr Number: 83-16327

    See all GPIO and Ribbon Cables in Cables and Accessories

    Limited Stock Clearance Item

    $0.25

    (Reg: $2.75)
    Buy Now

    83-17316 - EZ-Connect HAT for Raspberry Pi

    Easily connect inputs and outputs to your Pi's GPIO header with the EZ-Connect HAT.

    Mfr Name: Alchemy Power

    Mfr Number: 83-17316

    See all Add-On Boards and Modules in Raspberry Pi

    In Stock

    $19.99

    Buy Now

    28-17468 - Quarter Size Perma Board Project Board

    The PermaProto for Pi is a proto board combined with a Pi Cobbler breakout. Simply solder the 2x13 pin header in and you get all the labeled breakouts with tons of prototyping space, power rails, mounting holes and that gorgeous silk.

    Mfr Name: Adafruit Industries

    Mfr Number: 1171

    See all Standard Breadboards in Solderless Breadboards

    In Stock

    $4.49

    (MSRP $4.95)
    Buy Now

    83-16402 - PiFace Digital Revision 2

    The Pi-Face Digital is the first of a range of interfaces to allow the Raspberry Pi to control and manipulate the real world. It allows the Raspberry Pi to read switches connected to it – a door sensor or pressure pad perhaps, a microswitch or reed switch, or a hand held button. With appropriate…

    Mfr Name: PiFace

    Mfr Number: 2434230

    See all Project Labs in Components

    In Stock

    $32.99

    Buy Now

    83-16341 - Pi Lite Junior Led IO Board For Raspberry Pi

    The Pi-LITEr is a fully assembled add on board for the Raspberry Pi computer. It has 8 ultra-bright white LED's on a board which plugs directly on to the 26 way GPIO header.

    Mfr Name: Distributed By MCM

    Mfr Number: PI-LITER

    See all Add-On Boards and Modules in Raspberry Pi

    In Stock

    $4.49

    Buy Now

    83-16980 - Raspberry Pi Sense HAT - AstroPi

    The Raspberry Pi Sense HAT attaches via the Pi's 40pin GPIO port to read and display sensor data from a host of built-in sensors. Based on the same hardware that is currently in orbit on the International Space Station, the Sense HAT lets you create applications, experiments, and games.…

    Mfr Name: Raspberry Pi

    Mfr Number: 2483095

    See all Add-On Boards and Modules in Raspberry Pi

    In Stock

    $30.00

    (MSRP $35.00)
    Buy Now

    83-17105 - Centipede Shield GPIO Expander

    Run out of I/O pins on your Arduino yet again? Add 64 digital inputs or outputs with this shield.

    Mfr Name: Macetech

    Mfr Number: MTCEN001

    In Stock

    $24.99

    Buy Now

    83-16329 - 200 mm 40 Pin Plug Leads to Plug Leads Ribbon Cable

    6" Female to Female 2.54mm Jumper wires Handy for making wire harnesses or jumpering between headers on PCB's. These premium jumper wires are a little over 6" (150mm) long and come in a 'strip' of 40 (4 pieces of each of ten colors).

    Mfr Name: Stellar Labs

    Mfr Number: HK-40PFL40PFL-200

    See all GPIO and Ribbon Cables in Cables and Accessories

    In Stock

    $2.95

    Buy Now

    83-16520 - Piface Relay for the PiFace Relay Board

    …a HAT compliant and stackable quad relay output daughter card for the PiFace Relay+ board providing for simple on/off control of loads up to 2A DC from your Raspberry Pi programs. Expand your GPIO options by stacking up to eight PiFace RELAY+ boards together with an expander board plugged into each.

    Limited Stock

    $20.99

    Buy Now

    83-14875 - Raspberry Pi Cobbler Kit with GPIO Cable

    This breakout board enables you to bring the Raspberry Pi GPIO connections out from the board onto a breadboard or other suitable substrate. This kit will need to be soldered together and then used in conjunction with a suitable 0.1" / 2.54mm pitch Breadboard.

    Mfr Name: Cyntech

    Mfr Number: CTLGPIOBREAKOUT

    See all Add-On Boards and Modules in Raspberry Pi

    Limited Stock

    $6.99

    Buy Now

    83-14425 - Raspberry Pi GPIO Cable

    * 26 Pin GPIO Ribbon Cable for Raspberry PI* For Use With: Raspberry Pi* Features: 4" (100mm)* 26 Socket & Wire, Send & Receive I2C and SPI Data* 13 X 2 Rows

    Mfr Name: Distributed By MCM

    Mfr Number: SC12819

    See all GPIO and Ribbon Cables in Cables and Accessories

    Limited Stock

    $2.99

    Buy Now

    83-16346 - Cobbler Multi GPIO Board for Raspberry Pi

    The enhanced cobbler features multi GPIO configurations for use in a variety of projects. This is the ideal expansion board for adding additional electronic hardware to your Raspberry Pi with ease. Silk screen is clearly labeled with GPIO pin outs and features 2 x 13 way pin headers and 2 x 13 way…

    Mfr Name: Pro Signal

    Mfr Number: CTLENHANCOBBLER-01

    See all Add-On Boards and Modules in Raspberry Pi

    In Stock

    $7.99

    Buy Now

    83-16324 - 100mm Female To Female 40Pin IDC Ribbon Cable

    40 way ribbon cable perfect for accessing the GPIO (General Purpose Input Output) port on the Raspberry Pi Model B+ Board

    Mfr Name: Stellar Labs

    Mfr Number: 83-16324

    See all GPIO and Ribbon Cables in Cables and Accessories

    In Stock

    $1.99

    Buy Now

    83-17281 - PaPiRus ePaper Screen for Raspberry Pi - Large

    Paper hats may be old news, but this ePaper HAT for the Raspberry Pi can still turn heads. This kit includes a driver board and a large ePaper / eInk screen that can easily be integrated into your projects.

    Mfr Name: Pi Supply

    Mfr Number: 83-17281

    See all Add-On Boards and Modules in Raspberry Pi

    In Stock

    $42.99

    Buy Now

    83-17310 - PiBlox Enclosure for Raspberry Pi™ 3 - Black

    Spice up your studded plastic building brick projects with the Pi-Blox case for Raspberry Pi 3, 2 ,and B+. Pi-Blox is cleverly designed to integrate seamlessly with the studded plastic building bricks made by a certain company with four letters in their name (hint: it starts with the letter "L.")

    Mfr Name: Multicomp

    Mfr Number: CBPIBLOX-BLK

    See all Raspberry Pi in Single Board Computing Cases

    In Stock

    $6.99

    Buy Now

    83-17284 - Gert VGA GPIO Adapter for Raspberry Pi

    This Gert VGA 666 board is designed for use with the Raspberry Pi Model B+, Pi2, and Pi3 (will not work with Model A/B as the additional GPIO pins on the Model B+ are required). It is an open source hardware design recently released publicly by Gert van Loo who was one of the hardware engineers that…

    Mfr Name: Pi Supply

    Mfr Number: 83-17284

    See all Add-On Boards and Modules in Raspberry Pi

    In Stock

    $8.99

    Buy Now

    83-14592 - Pi T-Cobbler Breakout Kit for Raspberry Pi with GPIO Cable

    …embedded computer projects with it. What you need is an add on prototyping Pi T-Cobbler from Adafruit, which can break out all those tasty power, GPIO, I2C and SPI pins from the 26 pin header onto a solderless breadboard. This mini kit will make "cobbling together" prototypes with the Pi super easy.

    Mfr Name: Adafruit Industries

    Mfr Number: 1105

    See all Project Labs in Components

    In Stock

    $7.49

    (MSRP $7.95)
    Buy Now

    28-17914 - Key Lime Pi FTDI Power GPIO Board

    The Key Lime Pi kit breaks out the Raspberry Pi's GPIO connector, adds eight 10-bit analog inputs, converts the Pi's serial interface into a standard FTDI connector and allows for external power headers to be added if desired (standard 0.1" pin headers and JST-PH vertical header). There is a kit…

    Limited Stock

    $9.00

    Buy Now