MCM Electronics

I2c Sensors

Refinements

    Category
    Price
      $0
      $290

    I2c Sensors

    1 - 24 of 24
    Related Categories: Lepton | Camera Module
    Sort By Items
    Page  of 1
    Product Detail Availability Buy

    28-17752 - DWO I2C LCD KIT

    The DigiSpark is an Attiny85 based microcontroller development board similar to the Arduino line, only cheaper, smaller, and a bit less powerful. With a whole host of shields to extend its functionality and the ability to use the familiar Arduino IDE the Digispark is a great way to jump into…

    Mfr Name: Digistump

    Mfr Number: DSK-00016

    See all Project Labs in Components

    In Stock

    $6.50

    (MSRP $17.95)
    Buy Now

    83-16810 - Intel Edison 9 Degrees Block Adapter Board

    …Freedom Block for the Intel® Edison uses the LSM9DS0 9DOF IMU for full-range motion sensing. This chip combines a 3-axis accelerometer, a 3-axis gyroscope, and a 3-axis magnetometer. By default, the IMU is connected to the Edison through the I2C bus but it can be configured to use the SPI bus.

    Mfr Name: SparkFun

    Mfr Number: DEV-13033

    See all Development Kits in Single Board Computers

    In Stock

    $10.50

    Buy Now

    83-17111 - TinyDuino TinyShield Accelerometer Module

    Measure acceleration in 3 directions using this shield and your TinyDuino.

    Mfr Name: Tiny Circuits

    Mfr Number: ASD2611-R

    See all Shields and Modules in Arduino

    In Stock

    $5.24

    Buy Now

    83-17667 - Moto Mods Display Personality Card

    The Display Personality Card connects directly to the Moto ModsT Development Kit (MDK) for an example of how to integrate a display and backlight into your MDK project. Each Personality Card is an end-to-end example with Open-Sourced Moto Mod firmware and an Android app.

    Mfr Name: Moto

    Mfr Number: 2581427

    In Stock

    $14.06

    Buy Now

    28-16890 - DWO PROTO BOARD

    18M2 PICAXE Motor-Control Prototype Board An interface board for mounting a 18M2 PICAXE, with a L293D quad-output motor driver circuit for easy motor control.

    Mfr Name: Cebek

    Mfr Number: EDU-CHI35

    See all Picaxe in Components

    In Stock

    $10.26

    Buy Now

    28-18035 - Trinket 3.3V Arduino Controller Module

    Trinket may be small, but do not be fooled by its size! It's a tiny microcontroller board, built around the Atmel ATtiny85, a little chip with a lot of power. We wanted to design a microcontroller board that was small enough to fit into any project, and low cost enough to use without hesitation.…

    Mfr Name: Adafruit

    Mfr Number: 1500

    See all Wearable LEDs in LEDs

    On Backorder (Expected in 14 days)

    $7.71

    (MSRP $7.95)
    Buy Now

    83-17813 - Pure Thermal 1 With Shuttered Lepton Module

    PureThermal 1 - FLIR Lepton Smart I/O Module v1.2 with FLIR Shuttered 50� Lepton PureThermal 1 is the latest innovation in FLIR Leptonr development by GetLab. Get thermal video over USB right out of the box for all of your favorite platforms and hack it to your heart's content..

    Mfr Name: Groupgets LLC

    Mfr Number: 56354429

    See all Sensors in Prototyping

    On Backorder (Expected in 21 days)

    $289.00

    Buy Now

    28-17959 - Parallax P8X32A-D40 40 Pin DIP Processor

    …is a multicore microcontroller that is programmable in high-level languages (SpinT and C) as well as a low-level (Propeller assembly) language. Application development is simplified by using the set of pre-built objects for video (NTSC/PAL/VGA), mice, keyboards, LCDs, stepper motors and sensors.

    Mfr Name: Parallax

    Mfr Number: P8X32A-D40

    See all Parallax in Single Board Computers

    On Backorder (Expected in 21 days)

    $9.17

    Buy Now

    28-18095 - Flora Color Sensor Module

    The Adafruit Flora Color Sensor uses the best color sensor on the market, the TCS34725, which has RGB and Clear light sensing elements and a IR blocking filter. This color sensor will allow you to customize the color of your wearable LEDs to the objects around you

    Mfr Name: Adafruit

    Mfr Number: 1356

    See all Wearable LEDs in LEDs

    On Backorder (Expected in 14 days)

    $12.86

    Buy Now

    28-18090 - Flora Light Sensor Module

    The Adafruit Flora Light Sensor uses the best light sensor on the market, the TSL2561, ideal for use in a wide range of light situations. The light sensor will allow you to measure both visible light, hidden light or a combination of both

    Mfr Name: Adafruit

    Mfr Number: 1246

    See all Sensors in Prototyping

    On Backorder (Expected in 14 days)

    $7.71

    (MSRP $7.95)
    Buy Now

    28-18100 - Flora Accelerometer Sensor Module

    The Adafruit Flora Accelerometer+Compass sensor can sense which direction is down (towards earth) and how fast the board is accelerating in 3D space. The board also detects magnetic north. All this data can be used to change the rate and intensity of wearable LEDs

    Mfr Name: Adafruit

    Mfr Number: 1247

    See all Sensors in Prototyping

    On Backorder (Expected in 14 days)

    $20.07

    Buy Now

    28-19885 - Flora Accelerometer and Gyroscope Sensor

    The Adafruit Flora Accelerometer sensor can sense which direction is down (towards earth) and how fast the board is accelerating in 3D space. All this data can be used to change the rate and intensity of wearable LEDs

    Mfr Name: Adafruit

    Mfr Number: 2020

    See all LED in Project Lamps

    On Backorder (Expected in 14 days)

    $17.49

    (MSRP $19.95)
    Buy Now

    83-15710 - RGB LCD Shield Kit with 16x2 Character Negative Display-Uses Only 2 Pins

    RGB LCD Shield for Arduino Microcontroller Boards that only uses 2 I2C pins. The best part is you don't really lose those two pins either, since you can stick i2c-based sensors, RTCs, etc and have them share the I2C bus. This is a super slick way to add a display without all the wiring hassle.

    Mfr Name: Adafruit

    Mfr Number: 714

    See all Shields and Modules in Arduino

    On Backorder (Expected in 14 days)

    $26.20

    Buy Now

    83-15702 - 4-Channel I2C-Safe Bi-Directional Logic Level Converter

    The Arduino and Basic Stamp Microcontrollers are 5V devices, and most modern sensors, displays, flash cards and modes are 3.3V-only, many makers find that they need to perform level shifting/conversion to protect the 3.3V device from 5V.

    Mfr Name: Adafruit

    Mfr Number: 757

    See all Project Labs in Components

    On Backorder (Expected in 14 days)

    $4.15

    Buy Now

    83-17812 - FLIR Lepton Breakout With Shuttered Lepton Module

    FLIR Lepton Breakout With Shuttered Lepton Module The FLIR Leptonr 2.x camera core is a long-wave infrared (LWIR) thermal imaging breakthrough in size, power consumption, and price. Combine this with the breakout board which allows you to plug in all Lepton types into your favorite single-board…

    Mfr Name: Groupgets LLC

    Mfr Number: 58319378

    See all Sensors in Prototyping

    On Backorder (Expected in 21 days)

    $259.00

    Buy Now

    83-16998 - PhoBot - Robot Controller for Photon

    Phobot Robot Controller for Spark Photon / Electron Create autonomous robots using the WiFi programmable Photon or Electron Modules from Spark.io.

    Mfr Name: Seeed Studio

    Mfr Number: 114990229

    See all Robot Components in Robotics

    On Backorder (Expected in 97 days)

    $18.99

    Buy Now

    83-16407 - MicroStack Accelerometer Module

    Microstack Accelerometer MicroStack is a family of reusable accessory boards with a common framework consisting of form factor and interface connections that work across various different single board computer(SBC) platforms through the use of platform specific base boards (adapter boards) starting…

    Mfr Name: Microstack

    Mfr Number: 2434229

    See all Project Labs in Components

    On Backorder (Expected in 97 days)

    $11.99

    Buy Now

    28-17543 - MECHATRONICS ROBOTIC KIT ROBOTIC KIT

    This Robot Kit operates on the Tower System Mechatronics Board which is an easy-to-use mechatronics development and demonstration platform. This toolset allows for the science of combining mechanics, electronics, and software into an integrated system. Through building the kit, you can experience…

    Mfr Name: Sanyo

    Mfr Number: FSLBOT

    On Backorder (Expected in 12 days)

    $260.49

    Buy Now

    83-15747 - 16 X 2 LCD Display Blue on White

    This new Adafruit shield makes it easy to use a 16x2 Character LCD with an Arduino. Unfortunately, most LCDs do require quite a few digital pins, 6 to control the LCD and then another pin to control the backlight for a total of 7 pins. That's almost half of the pins available on a classic Arduino!

    Mfr Name: Adafruit

    Mfr Number: 772

    See all LCDs in Components

    On Backorder (Expected in 14 days)

    $18.45

    Buy Now

    28-18040 - Trinket 5V Arduino Controller

    Trinket may be small, but do not be fooled by its size! It's a tiny microcontroller board, built around the Atmel ATtiny85, a little chip with a lot of power. We wanted to design a microcontroller board that was small enough to fit into any project, and low cost enough to use without hesitation.…

    Mfr Name: Adafruit

    Mfr Number: 1501

    See all Wearable LEDs in LEDs

    On Backorder (Expected in 14 days)

    $7.71

    (MSRP $7.95)
    Buy Now

    83-14588 - Blue & White 16x2 LCD + Keypad Kit for Raspberry Pi

    This new Adafruit Pi Plate makes it easy to use a 16x2 Character LCD. 16x2 Character LCDs typically require quite a few digital pins, 6 to control the LCD and then another 1 to control the backlight for a total of 7 pins. That's nearly all the GPIO available on a Pi!

    Mfr Name: Adafruit

    Mfr Number: 1115

    See all Project Labs in Components

    On Backorder (Expected in 67 days)

    $21.10

    Buy Now

    28-19895 - Gemma Wearable LED's Starter Pack

    Get started with Adafruit GEMMA with this lovely starter kit! Included is everything you need to make a basic project. There's a GEMMA board, four sewable bright RGB pixels, a battery holder (batteries not included,) 2-ply conductive thread, alligator clips to help you test out your circuit, and a…

    Mfr Name: Adafruit

    Mfr Number: 1657

    See all Wearable LEDs in LEDs

    On Backorder (Expected in 14 days)

    $26.99

    (MSRP $29.95)
    Buy Now

    28-18055 - Gemma Arduino Wearable Controller

    Love FLORA but want a bite-sized version? Look no further, GEMMA is a tiny wearable platform board with a lot of might in a 1" diameter package. Powered by a Attiny85 and programmable with an Arduino IDE over USB, you'll be able to realize any wearable project!

    Mfr Name: Adafruit

    Mfr Number: 1222

    See all Wearable LEDs in LEDs

    On Backorder (Expected in 14 days)

    $9.95

    Buy Now

    83-17692 - Adafruit Feather 32U4 Basic

    At the Feather 32u4's heart is at ATmega32u4 clocked at 8 MHz and at 3.3V logic, a chip setup we've had tons of experience with as it's the same as the Flora. This chip has 32K of flash and 2K of RAM, with built in USB so not only does it have a USB-to-Serial program & debug capability built in with…

    Mfr Name: Adafruit

    Mfr Number: 2771

    See all Development Kits in Single Board Computers

    On Backorder (Expected in 21 days)

    $19.99

    Buy Now